Series 1000 and Series 3000

Our Series 1000 and Series 3000 Valve Volume Boosters can help improve the stroking speed of an actuator, or increase the flow capacity. They reproduce pneumatic signals in a 1:1 ratio. For maximum performance, when used on diaphragm actuators, the volume booster unit should be installed as close as possible to the actuator. Other features of our volume boosters include:
FAST RESPONSE
This can greatly increase actuator stroking speeds
HIGH STABILITY
Allow a normal slow actuator response to small signal changes
LOW AIR CONSUMPTION
The soft seat enables a tight shut-off, reducing air consumption
Both of our volume boosters can be made from either aluminium or stainless steel. They can also operate in temperatures as low as -40°C. The more detailed technical specification of each is as follows:

Series 1000 Technical Specification

Port size
¼” NPTF
Maximum supply
100 psi (6.9 Bar)
Input/output ratio
1:1
Linearity
0.4%
Temperature
-40°C to 70°C
Flow capacity
10 SCFM
Materials
Aluminium & 316 Stainless Steel

Series 3000 Technical Specification

Port size
½” NPTF
Pipe Connection Size
¾” NPTF
Maximum supply
150 psi (10.3 Bar)
Input/output ratio
1:1
Linearity
0.4%
Temperature
-40°C to 70°C
Flow capacity
43 SCFM
Materials
Aluminium & 316 Stainless Steel
Please get in touch if you'd like more information, or would like to discuss your requirements for volume boosters, actuators or any other instruments.

Accreditations

Our many accreditations and processes give you peace of mind when buying from Kent Introl. These include OHSAS 18001, ISO9001, ISO/TS29001, ISO14001, PED Certificate API 6A, API 17D Monogram and more. Visit our Accreditations page to find out more.

Accreditations

Our many accreditations and processes give you peace of mind when buying from Kent Introl. These include OHSAS 18001, ISO9001, ISO/TS29001, ISO14001, PED Certificate API 6A, API 17D Monogram and more. Visit our Accreditations page to find out more.

Engineering excellence

We continually invest in all areas of the design, testing and manufacturing process to bring you the right products at the right time, at a competitive price. This gives us ever-greater control over the timing and quality of all aspects of the manufacturing process. Visit our Research and Development page to find out more.

Engineering excellence

We continually invest in all areas of the design, testing and manufacturing process to bring you the right products at the right time, at a competitive price. This gives us ever-greater control over the timing and quality of all aspects of the manufacturing process. Visit our Research and Development page to find out more.

Specialist services

We can assist you right through the lifecycle of your valves and other equipment. Whether you need hands-on servicing and support, or technical training to help your own team, we have the expertise to help you maximise the performance of your valves. Visit our Services page to find out more.

Specialist services

We can assist you right through the lifecycle of your valves and other equipment. Whether you need hands-on servicing and support, or technical training to help your own team, we have the expertise to help you maximise the performance of your valves. Visit our Services page to find out more.

Contact the experts today
Tel: +44 (0)1484 710311 | Email: info@kentintrol.com
Contact the experts today
Tel: +44 (0)1484 710311
Email: info@kentintrol.com
Top